Portland and Western

Feedback, questions, updates on current projects, you name it!
Pencil
Site Admin
Posts: 1284
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Portland and Western

Postby Pencil » Sun Nov 23, 2014 11:36 pm

As they say, 'And now for something completely different:'

After picking up "Railroads of Hillsboro", I decided to try my hand at reskinning Ben's SD9 model for some local locos.

First is No 1851, the "Hillsboro":
Image
This one is now on the DLS.

Next up is No 1854, the "Beaverton":
Image

I suspect this one will be on it's way to the DLS shortly.

There are two more SD9's on the PNWR roster. One is a chop hood; like Ben's SD16 model, and the other is a high hood unit still in the remains of SP paint. Someday; I'll do those as well; then start in on some of the GPs and SWs.

If nothing else, reskinning diesels is a nice change from building my own steam era stuff!

Curtis

Trainboi
Posts: 216
Joined: Fri Jul 05, 2013 9:16 am

Re: Portland and Western

Postby Trainboi » Tue Nov 25, 2014 7:30 pm

Those are GORGEOUS. I think I've gotta go to the DLS right now and get the one...Might there be any chance of an undec model with that occlusion to make the rest of our lives easier?

Pencil
Site Admin
Posts: 1284
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Re: Portland and Western

Postby Pencil » Wed Nov 26, 2014 10:29 pm

Sure; I'll post the .psd files shortly. The second unit is also now on the DLS.

Pencil
Site Admin
Posts: 1284
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Re: Portland and Western

Postby Pencil » Mon Feb 23, 2015 10:53 pm

I found some information on a couple more SD9s that used to be on the PNWR. They came from the Chicago and Illinois Midland in 1999, and were scrapped in 2004. I haven't found a photo of No. 1854 (1st) on the PNWR yet, so I'm assuming it was similar to No. 1855 (which there are a couple photos of on the PNWR).

Here's a WiP in TS12:
Image

No dynamic brakes on these, and they have some interesting air filters...

Trainboi
Posts: 216
Joined: Fri Jul 05, 2013 9:16 am

Re: Portland and Western

Postby Trainboi » Thu Feb 26, 2015 4:36 pm

Very good looking, Curtis. I like the green livery.

Pencil
Site Admin
Posts: 1284
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Re: Portland and Western

Postby Pencil » Mon Mar 16, 2015 10:21 pm

Thanks, Dan!

I've done a little touch up on the C&IM locos, and updated the wip shot (above).
Apparently, this loco never ran on the PNWR; it was just used as a parts engine. Its sister (1855, ex C&IM 54) ran for a year or two (1999-2001) before it was sidelined and scrapped in 2004.
1851 is no longer running, either. She was taken out of service with a broken crankshaft in 2009, and in 2011, her trucks went to No. 1501. She hasn't been scrapped yet, so there may still be hope...
I've also started on 1852 and 1853. 1853 was pulled out of service and scrapped in 2009, due to complications arising from a bent frame in 2005.

WIP of 1852 and 1853:
Image
Image

I've also gone back and added lights (and pseudo mars lights / gyro lights) to the two locos on the DLS, so expect some updates to those two as well.....

Curtis

Pencil
Site Admin
Posts: 1284
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Re: Portland and Western

Postby Pencil » Wed Mar 18, 2015 9:14 pm

Found a couple of photos of the ex C&IM locos on the P&W, and so have updated the models and textures accordingly. It looks like the two locos may have had slightly different patch jobs. Above is the updated 1854 (1st) and here is the 1855:

Image

Pencil
Site Admin
Posts: 1284
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Re: Portland and Western

Postby Pencil » Thu Mar 19, 2015 8:28 pm

A bit of an update to 1852:

Image

Still *way* too clean, though :)

Trainboi
Posts: 216
Joined: Fri Jul 05, 2013 9:16 am

Re: Portland and Western

Postby Trainboi » Thu Mar 19, 2015 9:28 pm

That looks amazing, Curtis. I'm looking forward to the new variety of shortline diesels you are putting into the game.

Pencil
Site Admin
Posts: 1284
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Re: Portland and Western

Postby Pencil » Sat Mar 21, 2015 10:48 pm

It's been a fun change :)

One more wip - this one's a SD7; No. 1501; 'Roseville'. 1853 started life as a SD7 also, but I guess she's been rebuilt enough that they are calling her a SD9 now.

Again, needs lots more rust, grunge, and patches....
Image

Like 1853, this one lost her dynamics during one of the SP rebuilds.....

I've uploaded the current version of all 7 locos to http://www.carsoncarshops.com/files/PNWR_locos.cdp - any dependencies not included should be available on the DLS.
1851, both 1854's, and 1855 should be pretty much ready to upload to the DLS; the other 3 still have some work to do.

Curtis

Pencil
Site Admin
Posts: 1284
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Re: Portland and Western

Postby Pencil » Thu Apr 02, 2015 1:45 pm

1851, 1853, both 1854's, and 1855 are all now on the DLS - enjoy!!

Pencil
Site Admin
Posts: 1284
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Re: Portland and Western

Postby Pencil » Mon Apr 13, 2015 10:22 am

Saw 2301 'Sheridan' in downtown Hillsboro last week, so now I have to do a GP39-2. Finally, a locomotive younger than I am - though not by much ;-)
wip_render_1.png
wip_render_1.png (57.14 KiB) Viewed 9431 times
Starting from Auran's old GP38-2 mesh. Not sure why, as I think I've moved every vertex on the thing at least twice now :)

Likely won't be done for a *very* long time, though.....


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 9 guests

cron