3DC rolling stock in 3' NG
Windows
Rick
I understand the need to make sure about getting the windows figgerd out.
Would a suggestion be that on this piece there would be none ?
The opening there is plenty big enough for this (MOW) rolling stock.
HHmmmmmmmm
Ken
I understand the need to make sure about getting the windows figgerd out.
Would a suggestion be that on this piece there would be none ?
The opening there is plenty big enough for this (MOW) rolling stock.
HHmmmmmmmm
Ken
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
I think she's starting to take on a little character, now...
It gets pretty cold in them thar hills, Ken. We've already cut down all the trees in the Mohave forest. Windows are good for ventilation when that fire is raging hot...

Bed time...

It gets pretty cold in them thar hills, Ken. We've already cut down all the trees in the Mohave forest. Windows are good for ventilation when that fire is raging hot...

Bed time...

Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
MOW What ?
It really is beginning to look like something. May I offer a slight bit of inspiration...somewhere inside, place an attachment point on the floor and upon it, use the following kuid <45676:135002:1> .
Surprise yourself with a little gift. Norm used this in our caboose and the coach and I love it. Try it.
You have my blessing.
Ken
BTW - What gauge are you using ?
Surprise yourself with a little gift. Norm used this in our caboose and the coach and I love it. Try it.
You have my blessing.
Ken

BTW - What gauge are you using ?

Re: MOW What ?
Look at the thread title,Col Hogan wrote:...BTW - What gauge are you using ?


Sam
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
He he, I thought the title of this thread was self explanatory, also but, for those that aren't really paying that much attention, I'm building my first series of rolling stock in three foot narrow gauge, (my favorite gauge, btw.)
I'm not quite sure what <45676:135002:1> is all about... Trade mark maybe? If it's his trade mark, I'll let him use it.
Being an old HO gauge model builder, I'm doing my best to try and make my virtual models look as real as they can be.
Those doors need a little adjusting but I like 'em, too. Thanks, Sam, and everybody else, also.

I'm not quite sure what <45676:135002:1> is all about... Trade mark maybe? If it's his trade mark, I'll let him use it.
Being an old HO gauge model builder, I'm doing my best to try and make my virtual models look as real as they can be.
Those doors need a little adjusting but I like 'em, too. Thanks, Sam, and everybody else, also.

Last edited by thegrindre on Tue Apr 15, 2008 2:59 am, edited 1 time in total.
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
Minor update...
I guess you may all know by now, or at least by this pic, that it will be a Blacksmith's Car.
The furnace was rather fun to install. I couldn't use bricks because of the mobility on the rails so it had to be built of 'steel'.

Comments, suggestions, and criticisms are all welcomed.
Have fun,

I guess you may all know by now, or at least by this pic, that it will be a Blacksmith's Car.
The furnace was rather fun to install. I couldn't use bricks because of the mobility on the rails so it had to be built of 'steel'.

Comments, suggestions, and criticisms are all welcomed.
Have fun,

Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
Thanks, Norm. 28' boxcar that a tree fell on.
Things have come out proportionately correct,


Things have come out proportionately correct,


Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
OK, folks, I need a little input from you guys, now.
I can detail the inside of this thing until the cows come home causing the polys to raise. All surfaces that aren't seen have been deleted as it is.
Question is, how much detail does it really need? How far should I go with it?
I could turn it into a show piece but is it really necessary?
Here's a typical Blacksmith's shop;

Now, come on and speak up, OK?
Ben
Curtis
Ken
Norm
Sam
Jayo
Anybody else?
Thank you,

I can detail the inside of this thing until the cows come home causing the polys to raise. All surfaces that aren't seen have been deleted as it is.
Question is, how much detail does it really need? How far should I go with it?
I could turn it into a show piece but is it really necessary?
Here's a typical Blacksmith's shop;

Now, come on and speak up, OK?
Ben
Curtis
Ken
Norm
Sam
Jayo
Anybody else?
Thank you,

Last edited by thegrindre on Wed Apr 16, 2008 4:50 am, edited 2 times in total.
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
Blacksmith's Car
Alright, since you asked. I have one idea - out near the barrel you could put a small crane that is used in case the load is too heavy to pick up.
Also could be used to lift heavier boxes of equipment. Looks a lot like a thee-legged type and one you used on your USA Yesterday route.
Ken
Also could be used to lift heavier boxes of equipment. Looks a lot like a thee-legged type and one you used on your USA Yesterday route.
Ken

-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
That's already in the plans, Ken, thanks. I'm refering to the inside of the shop area. I'm not finished with the outside, yet. There's more to come out there...


Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
Lots of detail on that would be great, since there probably wouldnt be more than one in the same place. If a lot of the stuff on the walls was just done as textures, or atleast done that way in a lod I dont think it would be too bad. Basicly aslong as it doesnt make my computer crash
, detail it a lot.
