Possible new link and pin couplers.
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
Possible new link and pin couplers.
Hi all,
I've tried to create a different kind of logging link and pin coupling system and would like your input.
I've based my design on pics from the net, (see below), painted them black as shown but, I found them to be too dark for visual aspects so, I re-painted them to be a rusted up white paint job instead.
Anybody think I should release these?
Do you think there is a need/want for this type?
I've made them 1 foot tall by 1 1/2 feet wide and protrude out about 1 foot in length.
The link and pin is a bit hockey looking but I've tried to keep the poly count down. I can, of course, 'smooth' out the roundness but it will make the polys shoot up dramatically. Polys are 356 for the one with the link and pin in it, now. Is this acceptable? I'd like to add a bit more detail with nuts and bolts and screws and stuff. LOL
I've tested them on most all of our 3' ng rolling stock and they seem to work just fine. There doesn't seem to be a uniform to height with everybody so I built these to fit every body's.
Comments, suggestions, and criticisms welcomed.
Thanks,
I've tried to create a different kind of logging link and pin coupling system and would like your input.
I've based my design on pics from the net, (see below), painted them black as shown but, I found them to be too dark for visual aspects so, I re-painted them to be a rusted up white paint job instead.
Anybody think I should release these?
Do you think there is a need/want for this type?
I've made them 1 foot tall by 1 1/2 feet wide and protrude out about 1 foot in length.
The link and pin is a bit hockey looking but I've tried to keep the poly count down. I can, of course, 'smooth' out the roundness but it will make the polys shoot up dramatically. Polys are 356 for the one with the link and pin in it, now. Is this acceptable? I'd like to add a bit more detail with nuts and bolts and screws and stuff. LOL
I've tested them on most all of our 3' ng rolling stock and they seem to work just fine. There doesn't seem to be a uniform to height with everybody so I built these to fit every body's.
Comments, suggestions, and criticisms welcomed.
Thanks,
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
Looks good, Rick!
If you want to work around the TC 1&2 bug, leave off the :cull on the attachment point (in 3DC / GMAX). It's fixed in TC3, though, so I wouldn't worry about it one way or the other.jayo wrote:Nice, nice. You may want to consider working them differently from the ones on pencie's boxcars, so they will show up on Trainz Classics.
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
OK, I removed all the white and merged the rust layer onto a grimy gray background and came up with this;
Any better?
You guys aren't answering all my questions...
As far as making content for TC, I haven't got a clue. If anyone wants to alter my config files and re-release it, you're welcomed to do so. All my content has an open book policy on it. 'You may do with it as you please'.
So far, it's all I can do to get this stuff to work in '04 and '06, I'm not going out of my way to do any TC stuff. I don't have TC, I ain't gonna buy TC and, I threw my '06 in the trash because of that damn CMP.
I'm an '04 user, sorry.
Thanks, I appreciate the input,
Any better?
You guys aren't answering all my questions...
Anybody think I should release these?
Do you think there is a need/want for this type?
Polys are 356 for the one with the link and pin in it, now. Is this acceptable?
Can I go a bit higher on the polys?
What's recomended?
As far as making content for TC, I haven't got a clue. If anyone wants to alter my config files and re-release it, you're welcomed to do so. All my content has an open book policy on it. 'You may do with it as you please'.
So far, it's all I can do to get this stuff to work in '04 and '06, I'm not going out of my way to do any TC stuff. I don't have TC, I ain't gonna buy TC and, I threw my '06 in the trash because of that damn CMP.
I'm an '04 user, sorry.
Thanks, I appreciate the input,
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
I've completely rebuilt this asset, from the ground up, to look like this, now. It is about half the size of the first one, (above), and appears to be a bit more realistic although the back mounting plate is a little larger.
The back plate/mounting plate is now 1 1/4 feet square, (1' 3"), and will need at least that much mounting area.
I use in game peeps along with real measurements while building. It gives me a little better perspective on 'things'.
Do you think it's any better?
Thanks,
The back plate/mounting plate is now 1 1/4 feet square, (1' 3"), and will need at least that much mounting area.
I use in game peeps along with real measurements while building. It gives me a little better perspective on 'things'.
Do you think it's any better?
Thanks,
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
Lets see, answer s to your questions(in the order you asked):
1. yes!
2. yes!
3. I really don't know...
4. see answer #3
5. see answer #4
Hope this helps,
Sam
1. yes!
2. yes!
3. I really don't know...
4. see answer #3
5. see answer #4
Hope this helps,
Sam
My newest motto: Narrow Mindedness: the utter fascination and all consuming love of all railroad equipment that is narrow gauge, I myself have an acute case of this disease, for which there is (fortunately) no cure
The only style I've ever seen on RR cars is like what's at this link:
http://cprr.org/Museum/Ephemera/Link-Pin_Couplers.html. They were at the Kentucky rail museum. Yours look more like what would be on a locomotive. Seems like they'd be hard on the frame with no cushion, but that's just my observation and doesn't really mean anything.
That rusty white looks very realistic, great job, even if it isn't prototypical.
Norm
P.S. I've tried for a third time to email your trucks
http://cprr.org/Museum/Ephemera/Link-Pin_Couplers.html. They were at the Kentucky rail museum. Yours look more like what would be on a locomotive. Seems like they'd be hard on the frame with no cushion, but that's just my observation and doesn't really mean anything.
That rusty white looks very realistic, great job, even if it isn't prototypical.
Norm
P.S. I've tried for a third time to email your trucks
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
OK, great info, Norm. I'll have to do a bit more research, I guess and, thanks for the input.
This new re-built I did, knocked off about 150 polys, btw.
This new re-built I did, knocked off about 150 polys, btw.
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
Upon further investigation into this type of coupling system on rolling stock, I haven't been unable to find much if any. I believe Norm is right when saying that these things where on the locomotive only.
Therefore, this project has been canceled.
Therefore, this project has been canceled.
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
OK, it has been un-canceled. LOL But, it will be a WIP for awhile. No release date scheduled at this time...
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/