More NG30 stuff in progress....
More NG30 stuff in progress....
A freelanced boxcar:
A much smaller wood fuel shed (holds about 2 cords when full) and automatically regenerates fuel - no manual reloading required.
And a 3rd color of track (kind of inbetween the dark brown and bright yellow):
A much smaller wood fuel shed (holds about 2 cords when full) and automatically regenerates fuel - no manual reloading required.
And a 3rd color of track (kind of inbetween the dark brown and bright yellow):
Okay, I have done some comparisons and the Vulcan is the same width (!) as the EMRR cars, so that's a definate conversion. I am not sure about the Magma engine, though. It is much bigger than the EMRR cars, but I think I've seen an outside frame 2-4-2T in 30" gauge that would be around the same size.
I'm also eyeing one of these and one of these. (the last one is a 36" machine, but apparently some 30" ones were built)
I'm also eyeing one of these and one of these. (the last one is a 36" machine, but apparently some 30" ones were built)
Cheers,
Ben
Ben
Proof of concept:
f(x)
Vulcan and 2-4-2t in 30" gauge. Requires the betas from the 36" gauge versions for the requisite parts.
f(x)
Vulcan and 2-4-2t in 30" gauge. Requires the betas from the 36" gauge versions for the requisite parts.
Cheers,
Ben
Ben
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
Oh, yes, yes, yes. I'm drooling already. LOL
Great work coming down in narrow gauge lately.
Thanks for all the goodies... Although I'm gonna have to re-skin that 'baby' boxcar, ya know...
Great work coming down in narrow gauge lately.
Thanks for all the goodies... Although I'm gonna have to re-skin that 'baby' boxcar, ya know...
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
I told you the 2-4-2T was too big It's just the nature of the machine, it's too big for that tiny little enginehouse. Well, the 0-4-2T should fit (I have no drawings, so I have to guess. But, that's how I did the Vulcan and Magma engines.)
It looks like the Vulcan is around the same height and width as the Porter. I didn't plan that, it just happened.
It looks like the Vulcan is around the same height and width as the Porter. I didn't plan that, it just happened.
Cheers,
Ben
Ben
I like that boxcar. My experience is that most boxes in the US had peaked roofs rather than curved ones. That might be a variation you could make later.
I don't think I'll need any cars for the Kiso engine. The railway that used it only had disconnects and brake wagons built on disconnect frames. I'll make the disconnects eventually (not too hard, I have a set of plans for them). The coupler was link & pin (not as its shown in the screenshot, those are just placeholders) and it looks like it was around the same height as your 30" gauge equipment.
BTW, it has a cab now
I don't think I'll need any cars for the Kiso engine. The railway that used it only had disconnects and brake wagons built on disconnect frames. I'll make the disconnects eventually (not too hard, I have a set of plans for them). The coupler was link & pin (not as its shown in the screenshot, those are just placeholders) and it looks like it was around the same height as your 30" gauge equipment.
BTW, it has a cab now
Cheers,
Ben
Ben
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
Ben makes a point about the roof and although it's freelanced, I'm not sure they ever put the handle on that side of the door. Possibly two handles might work, though. (In logging, they might have used a flat roof...)
You might want to extend the break wheel a bit higher, waist high is usually good. It looks about knee high, now.
Looks good, real good...
@ Ben, that Kiso #6 would be one fine addition to this hobby. Very unique to this game.
You might want to extend the break wheel a bit higher, waist high is usually good. It looks about knee high, now.
Looks good, real good...
@ Ben, that Kiso #6 would be one fine addition to this hobby. Very unique to this game.
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
Yeah, the curved roof probably dates it back to at least the 1860's; which is probably a bit too early.
I thought it was a fun variation, but I'll convert it over to a flat roof; add a roofwalk, and some grab irons - bring it into at least the 1880's...
To get my round roof fix, maybe I'll do a Civil War boxcar or something
I thought it was a fun variation, but I'll convert it over to a flat roof; add a roofwalk, and some grab irons - bring it into at least the 1880's...
To get my round roof fix, maybe I'll do a Civil War boxcar or something