Posted: Sat May 10, 2008 9:45 am
Wow! Ive been away for a while and this has come a long way. Both versions look great, and I cant wait to try them out. 
I'm about to release it. I think I need art files and a couple things...
Page 6 of 12
Posted: Sat May 10, 2008 7:56 pm
Thanks, haven't seen you around for awhile...
I'm about to release it. I think I need art files and a couple things...
I'm about to release it. I think I need art files and a couple things...
Posted: Sun May 11, 2008 8:29 am
Your car looks great!
For my first car I made a locomotive. It was a 3ft 0-6-0T.I thought that it would be pretty easy. Wrong! It took me two years to finally release it.
Here's some pics of it:
http://i122.photobucket.com/albums/o258 ... 0-6-06.jpg
http://i122.photobucket.com/albums/o258 ... ame3-1.jpg
Good luck
For my first car I made a locomotive. It was a 3ft 0-6-0T.I thought that it would be pretty easy. Wrong! It took me two years to finally release it.
Here's some pics of it:
http://i122.photobucket.com/albums/o258 ... 0-6-06.jpg
http://i122.photobucket.com/albums/o258 ... ame3-1.jpg
Good luck
Posted: Sun May 11, 2008 9:45 am
Hey, lilb, not bad for the first car. 2 years! LOL
I want to build a Shay but don't know how to animate yet.
Thanks.
I want to build a Shay but don't know how to animate yet.
Thanks.
Posted: Sun May 11, 2008 12:19 pm
There is source files for a shay at http://www.mybizsoftware.net/trainz/downloads.htm
But since you use 3d Canvas that probaly won't help.
I might be able to animate one.
But since you use 3d Canvas that probaly won't help.
I might be able to animate one.
Posted: Mon May 12, 2008 2:13 am
lilb,
I might take you up on that as time goes on because I can't use those source files but, you can. Maybe we can work on one together...
(I hope it don't take two years, though.)
I might take you up on that as time goes on because I can't use those source files but, you can. Maybe we can work on one together...
(I hope it don't take two years, though.)
Posted: Tue May 13, 2008 10:56 am
Not sure I've accomplished what I set out to do, here...
Here's the 'new' caboose. A 12' 'bobber' in 3' ng. Still a bit more to do, yet;
Here's the 'new' caboose. A 12' 'bobber' in 3' ng. Still a bit more to do, yet;
Posted: Tue May 13, 2008 12:53 pm
Rick
Are you gonna leave the boards as horizontal ?
Looks a bit odd, just thought I'd Ask.
Are you gonna leave the boards as horizontal ?
Looks a bit odd, just thought I'd Ask.
Posted: Tue May 13, 2008 12:57 pm
Hey Rick, if you need a "personalised" shay to pull those cars, I have made several versions based of the one from shagster, I might be able to do something for you. Just send me some photos, drawings, or descriptions and I'll get to work!
Sam
Sam
Posted: Wed May 14, 2008 6:22 am
Sam
Just a passing thought - would it be possible to adjust the bogeys to a 30" gauge and another as a 36" gauge?
Do you have the Gmax files from Shagster?
Ken
Just a passing thought - would it be possible to adjust the bogeys to a 30" gauge and another as a 36" gauge?
Do you have the Gmax files from Shagster?
Ken
Posted: Wed May 14, 2008 7:19 am
Ken,
Is this a little better? I wasn't sure as to how I wanted the boards to run because I've seen them run both ways but I don't think my model looks that good with horizontal boards on it.
Poly count is at 1558, so far. Still got a few more things I wanna do to it, yet.
I'm not to sure I like these trucks, either. I think Curtis' 30" freelance boxcar trucks would look much better under it. I would need someone to kit bash them to 3 foot for me, though. I've already skinned them and have them posted on the DLS and here, at the bottom of my page.
http://www.geocities.com/thegrindre/page3ng.html I think this type of truck would fit this model a bit better, Don't you?
Sam,
I haven't done any of my home work as of yet. The only pic I can find of it, so far, is this one.
Is this a little better? I wasn't sure as to how I wanted the boards to run because I've seen them run both ways but I don't think my model looks that good with horizontal boards on it.
Poly count is at 1558, so far. Still got a few more things I wanna do to it, yet.
I'm not to sure I like these trucks, either. I think Curtis' 30" freelance boxcar trucks would look much better under it. I would need someone to kit bash them to 3 foot for me, though. I've already skinned them and have them posted on the DLS and here, at the bottom of my page.
http://www.geocities.com/thegrindre/page3ng.html I think this type of truck would fit this model a bit better, Don't you?
Sam,
I haven't done any of my home work as of yet. The only pic I can find of it, so far, is this one.
Posted: Wed May 14, 2008 11:34 am
Hmmm... that one might be kinda tough.... but I'll give it a shot! This could be fun... lets see, its a woodburner right? 3ft gauge? Yes, I'll get to work as soon as I can.
I think I could adjust the bogeys to 30in, and if you want to take a whack at it the gamx files are on his website: http://www.mybizsoftware.net/trainz/index.htm theres also a pair of Australian sugar cane locos there and some cars. I'll give it a try too, and if I can convert it to 30in maybe I'll try a standard gauge one too...
Sam
EDIT: If you download the shay you should replace the engine spec file with the one from prowler's shay, or it will go 50mph+
I think I could adjust the bogeys to 30in, and if you want to take a whack at it the gamx files are on his website: http://www.mybizsoftware.net/trainz/index.htm theres also a pair of Australian sugar cane locos there and some cars. I'll give it a try too, and if I can convert it to 30in maybe I'll try a standard gauge one too...
Sam
EDIT: If you download the shay you should replace the engine spec file with the one from prowler's shay, or it will go 50mph+
Posted: Wed May 14, 2008 11:38 am
Sam, our problem is, is that we don't do Gmax. LOL I'm creating in 3D Canvas Pro. Ken isn't creating at this time.
Wood burner, YES.
3 foot NG, Yes.
Wood burner, YES.
3 foot NG, Yes.
Posted: Wed May 14, 2008 6:16 pm
Hi Guys
Rick, they look a whole lot better now. Good of you to take hints and thanks for listening. The goldmine of 30ng Shays was tempting since I think most steamer-guys and NG flavored, too will opt for a darn nice, RARE Shay, even if someone else builds it. (Right, Sam ??)
Take on the challenge, bud. Those of us who care to renovate and kit-bash are anxious for another NG challenge. I'm looking forward to a great piece of artwork. Granted, I don't create, but I will give the kudos where they belong. Sam, once you're done, would you consider sharing the Gmax or 3DS files ?
Fine work, all of you, who share your wonderful work.
Ken
Rick, they look a whole lot better now. Good of you to take hints and thanks for listening. The goldmine of 30ng Shays was tempting since I think most steamer-guys and NG flavored, too will opt for a darn nice, RARE Shay, even if someone else builds it. (Right, Sam ??)
Take on the challenge, bud. Those of us who care to renovate and kit-bash are anxious for another NG challenge. I'm looking forward to a great piece of artwork. Granted, I don't create, but I will give the kudos where they belong. Sam, once you're done, would you consider sharing the Gmax or 3DS files ?
Fine work, all of you, who share your wonderful work.
Ken
Posted: Wed May 14, 2008 9:05 pm
Ken,
Ok, I've started work on the standard gauge version, 30in next.
Rick,
I might have to make it a 3-cylinder version, thats what Shagster's shay was. And I have an idea... could you make me a couple of buildings for me? If you want to do that I'l send you some drawings of what I want.
I can't promise a finish date for either of the shays, but I will say that the 30in one will be done much sooner than CN-60. If I do give a time, add a week to it, then it will probably be more acurate.
Sam
Ok, I've started work on the standard gauge version, 30in next.
Rick,
I might have to make it a 3-cylinder version, thats what Shagster's shay was. And I have an idea... could you make me a couple of buildings for me? If you want to do that I'l send you some drawings of what I want.
I can't promise a finish date for either of the shays, but I will say that the 30in one will be done much sooner than CN-60. If I do give a time, add a week to it, then it will probably be more acurate.
Sam