Crown Point Trestle

Feedback, questions, updates on current projects, you name it!
Post Reply
wildbill
Posts: 1
Joined: Thu Jan 22, 2009 9:20 am

Crown Point Trestle

Post by wildbill »

I would like to build the trestle on my V & T layout. The layout will be built on 8' modules. My layout will grow as I have more time as I have about 2000 sq ft to build my layout. I need plans for the Crown Point Trestle and would be willing to pay for them.
Thanks, Bill
thegrindre
Posts: 734
Joined: Wed Jun 20, 2007 12:13 pm
Location: Cotten fields of Mississippi, USA

Re: Crown Point Trestle

Post by thegrindre »

I suppose you've seen this photo. You can view it in a number of resolutions.
http://wnhpc.com/details/tbr0021

:)
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
Pencil
Site Admin
Posts: 1287
Joined: Sat Oct 08, 2005 10:28 am
Location: Portland, Oregon

Re: Crown Point Trestle

Post by Pencil »

Michael Collins has done a drawing of the Crown Point Trestle, but he has not yet published it. You can try and contact him through one of the V&T mailing lists on Yahoo to see what his plans are. You can also look at Kent's V&T website at http://www.virginiaandtruckee.com/. Look under the Buildings heading, then click on the Crown Point Trestle link. Also look under the 1916 report link (also under the buildings heading) for more info about the trestle.

Hope that helps!
Curtis
Post Reply