More NG30 stuff in progress....
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
LOL, All sounds good... I thought you might be going Euro on us for a minute there... LOL
Hey, don't think you need a full roof walk maybe just a small square to stand on to turn the break wheel. It is a rather small car. I also like the ladder instead of the grab irons idea. It is freelanced...
Hey, don't think you need a full roof walk maybe just a small square to stand on to turn the break wheel. It is a rather small car. I also like the ladder instead of the grab irons idea. It is freelanced...
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
With people for scale reference
And, it's available to try - http://www.carsoncarshops.com/files/30ng_boxcar.cdp
Still have some lod work to do, but it should be funtional
Comments / criticisms more than welcome!
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
Awesome!!! I love it!!!
I see the doorslide, now. Maybe the handle does belong on the other side. Not sure it really matters on a car that small, though.
You gonna install a turnbuckle on those truss rods??? Don't suppose it needs that either on a car that small...
Run that poly count up... I have a 'big' computer... LOLOLOL
Let's see... Ken likes dark green, Norm likes old reds and browns, and I like the thing to look ooooold.
I see the doorslide, now. Maybe the handle does belong on the other side. Not sure it really matters on a car that small, though.
You gonna install a turnbuckle on those truss rods??? Don't suppose it needs that either on a car that small...
Run that poly count up... I have a 'big' computer... LOLOLOL
Let's see... Ken likes dark green, Norm likes old reds and browns, and I like the thing to look ooooold.
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
Early cars didn't have any turnbuckles - that was a later invention
However, if you would all prefer, it wouldn't be that hard to add...
Because the car is so small, the door is offset to one side so there is actually room on the side to open it all the way. So, the door slides to the right on one side, and to the left on the other.
However, if you would all prefer, it wouldn't be that hard to add...
Because the car is so small, the door is offset to one side so there is actually room on the side to open it all the way. So, the door slides to the right on one side, and to the left on the other.
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
Everything works, too, btw. Great job!
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
Everything works just fine with the flat and the box car. Been testing my building with these two sweethearts.
I have a suggestion, though. I think the door opens too fast. Can we try slowing it down about 50%? It makes the sound way off and it doesn't look very realistic opening that fast, IMHO.
I have a suggestion, though. I think the door opens too fast. Can we try slowing it down about 50%? It makes the sound way off and it doesn't look very realistic opening that fast, IMHO.
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
hehe - I just slowed it down yesterday - great minds think alike
The new version is on the beta page.
Here's a series of pics showing operation on the Linknpin railroad:
Dropping the cars off:
Leaving the cars to be loaded:
Unloading the first car:
First car is empty:
Loading the first car:
After the first car has been loaded, the 2nd car is unloaded, then loaded. Then, the locomotive comes to collect the cars.
The new version is on the beta page.
Here's a series of pics showing operation on the Linknpin railroad:
Dropping the cars off:
Leaving the cars to be loaded:
Unloading the first car:
First car is empty:
Loading the first car:
After the first car has been loaded, the 2nd car is unloaded, then loaded. Then, the locomotive comes to collect the cars.
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
He, he, he, Oh ya... That's better, much better! I think you got a keeper, here. LOL
Nice job...
I gotta go try that new .gs file, now.
Nice job...
I gotta go try that new .gs file, now.
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
Ken, did you see this pic? The older, 1800's break wheels where about waist high. It was all very mechanical and hard to operate back then. They had to stand to do it.Pencil wrote:
With people for scale reference
And, it's available to try - http://www.carsoncarshops.com/files/30ng_boxcar.cdp
Still have some lod work to do, but it should be functional
Comments / criticisms more than welcome!
Watch some old timey black and white movies with trains in 'em. You'll see what I mean.
If I'm not mistaken, the mechanical part was chain, and I don't mean bicycle chain, real link chain... the heavy kind with a sprocket...
There weren't many girls that could do it back then. No women's lib. Ya had to be a real man...
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
Alright, I think I understand, now. Mostly I needed some explanation.
I had no idea the wheel had to be so high.
Thankyou Rick for the help.
Oh and BTW, Curtis - would there be a 30" EMRR bobber-caboose looming in the distance on your work table ? Hmmmmmmm.........??
And maybe if there is one, there might be a crewman looking out the window?
Ken
I had no idea the wheel had to be so high.
Thankyou Rick for the help.
Oh and BTW, Curtis - would there be a 30" EMRR bobber-caboose looming in the distance on your work table ? Hmmmmmmm.........??
And maybe if there is one, there might be a crewman looking out the window?
Ken
No plans for a caboose right now - I need to get back to the moguls, I think. You could always ask Narrowgauge if you can convert his 24" caboose / flanger to 30"....
I have the random textures working on the boxcar now. Just need to convert them to jpg so the file is 500K instead of 7.5MB....
edit: OK - files on the beta page have been updated. I'll still probably tweak some of the textures a bit, but it's getting close
I have the random textures working on the boxcar now. Just need to convert them to jpg so the file is 500K instead of 7.5MB....
edit: OK - files on the beta page have been updated. I'll still probably tweak some of the textures a bit, but it's getting close
-
- Posts: 734
- Joined: Wed Jun 20, 2007 12:13 pm
- Location: Cotten fields of Mississippi, USA
Hey Curtis,
Since you are using the random skin process on this little boxcar, do you mind if I re-skin this beta version I have and release it as an independent version? (I plan on looking into this random thing you're doing, also.)
Oh, btw, looking real nice, bud.
Since you are using the random skin process on this little boxcar, do you mind if I re-skin this beta version I have and release it as an independent version? (I plan on looking into this random thing you're doing, also.)
Oh, btw, looking real nice, bud.
Rick
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/
TRS 2004 Deluxe Edition v2.4 Build 2365
Creating in 3D Canvas Pro
Web site = http://allricksstuff.com/