North Tahoe Narrow Gauge
Re: North Tahoe Narrow Gauge
That's purdy!
Re: North Tahoe Narrow Gauge
Indeed it is, lol. Andrew has been kind enough to get me some scans from the Dayton book, and that has been instrumental...the tender is now gorgeously lined, and has a proper CP tender frame. The loco, too, has received a lot of attention in the form of retexturing. Many of the components under the running board are now black, and the lining over the pilot beam looks like it belongs to a small Welsh narrow-gauge locomotive.
Re: North Tahoe Narrow Gauge
Now your talking. I have long been a fan of Mr. A. J. Stevens 'El Gobernador'. The original Central Pacific Super Power engine. I read that they would parade the engine past the inbound passengers from the east just to show off the biggest engine in the world.
-John
-John
Re: North Tahoe Narrow Gauge
Indeed they would; unfortunately that's about all it was good for.
Still, it's a fun thing to build, and will give me much-needed parts towards the more successful Mastodon.
![Image](http://orig02.deviantart.net/7d9a/f/2016/078/f/b/elgoob_by_trainboi-d9vq4c6.png)
![Confused :?](./images/smilies/icon_confused.gif)
![Image](http://orig02.deviantart.net/7d9a/f/2016/078/f/b/elgoob_by_trainboi-d9vq4c6.png)
Re: North Tahoe Narrow Gauge
Gorgeous looking locomotive, Dan!!
Re: North Tahoe Narrow Gauge
Thank you Curtis.
![Image](http://orig06.deviantart.net/03ea/f/2016/084/2/3/el_goob_by_trainboi-d9wfmqy.gif)
Now only lacking some brake rigging and reverser and cab detail.
![Image](http://orig06.deviantart.net/03ea/f/2016/084/2/3/el_goob_by_trainboi-d9wfmqy.gif)
Now only lacking some brake rigging and reverser and cab detail.
Re: North Tahoe Narrow Gauge
Distractions have occurred:
![Image](http://orig14.deviantart.net/1f8d/f/2016/091/e/6/2016_03_31_150241_by_trainboi-d9xcog4.jpg)
![Image](http://images.akamai.steamusercontent.com/ugc/509278725908558804/16D0ECC9C36C59C23F94CF35A6CC217BC1C1DCE2/)
Though I suspect I won't mind having El Goob for a little bit if it means THAT BELL.
Seriously, I am quite happy with how TANE is running currently.
![Image](http://orig14.deviantart.net/1f8d/f/2016/091/e/6/2016_03_31_150241_by_trainboi-d9xcog4.jpg)
Though I suspect I won't mind having El Goob for a little bit if it means THAT BELL.
![Shocked :shock:](./images/smilies/icon_eek.gif)
Seriously, I am quite happy with how TANE is running currently.
Re: North Tahoe Narrow Gauge
Those *are* nice ![Smile :)](./images/smilies/icon_smile.gif)
Those boxcars are showing their age, though, aren't they....
Curtis
![Smile :)](./images/smilies/icon_smile.gif)
Those boxcars are showing their age, though, aren't they....
Curtis
Re: North Tahoe Narrow Gauge
They are indeed, though they are still pretty good. I keep meaning to update the ARN sometime...
- Kegg_Works
- Posts: 90
- Joined: Fri Nov 07, 2014 6:53 pm
- Location: Albany, GA
Re: North Tahoe Narrow Gauge
Those CP engines are looking fantastic!!
I'm particularly eager for "El Goob's" completion, and the enevitable 4-8-0 locos!
Question though about the CP paint schemes, were any of these AJ Stevens locos painted more colorfully? And by that Iean along similar lines of the Jupiter. I'm sure they weren't but I wanted to satisfy my curiosity.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
I'm particularly eager for "El Goob's" completion, and the enevitable 4-8-0 locos!
Question though about the CP paint schemes, were any of these AJ Stevens locos painted more colorfully? And by that Iean along similar lines of the Jupiter. I'm sure they weren't but I wanted to satisfy my curiosity.
Eat Yer' Beans...
Route Building A.D.D!!![Wink :wink:](./images/smilies/icon_wink.gif)
Route Building A.D.D!!
![Wink :wink:](./images/smilies/icon_wink.gif)
Re: North Tahoe Narrow Gauge
Several engines wore the same livery as Jupiter, but not because of Stevens...The "Caledonian" blue and scarlet livery was the standard livery of Schenectady Locomotive Works. Since I've so far only done Stevens' designs, they are generally either in his brown and black liveries, or the all-black of his contemporaries.
- Kegg_Works
- Posts: 90
- Joined: Fri Nov 07, 2014 6:53 pm
- Location: Albany, GA
Re: North Tahoe Narrow Gauge
From what I've seen of the paint schemes you've shown so far both schemes look pretty good, especially the brown one. Any info on what El Gobernador's colors were?
Eat Yer' Beans...
Route Building A.D.D!!![Wink :wink:](./images/smilies/icon_wink.gif)
Route Building A.D.D!!
![Wink :wink:](./images/smilies/icon_wink.gif)
Re: North Tahoe Narrow Gauge
Based solely on one photograph and the position of the lettering in that photograph which matches the lettering position on the Jupiter I believe the Goob came out of the shops wearing the Caledonian color scheme or at least wore that scheme at some point in time. Trainboi1 says that she had at least three different paint schemes over her short lifetime. I can't wait to take her over the Tehachapi!
- Kegg_Works
- Posts: 90
- Joined: Fri Nov 07, 2014 6:53 pm
- Location: Albany, GA
Re: North Tahoe Narrow Gauge
I can't wait to drive them in general! Though I think both the El Gobernador and CP 4-8-0s would look great with Jupiter-esque paint schemes. That's just my personal opinion though. Either way they are sure to be fantastic models which will look great on any old time or mountainous route. Perhaps even the SG version or Rollins Pass. ![Wink :wink:](./images/smilies/icon_wink.gif)
By the way, Trainboi, one question (though I think I've asked this before, but my memory can be short sometimes) will you also offer these engines in generic or unlettered schemes? I know that generic schemes might be popular with some of the more freelance modelers in the community. Just a thought is all.![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
PS: Still EAGERLY awaiting the release of those C&C engines, even if they are payware.![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Wink :wink:](./images/smilies/icon_wink.gif)
By the way, Trainboi, one question (though I think I've asked this before, but my memory can be short sometimes) will you also offer these engines in generic or unlettered schemes? I know that generic schemes might be popular with some of the more freelance modelers in the community. Just a thought is all.
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
PS: Still EAGERLY awaiting the release of those C&C engines, even if they are payware.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Eat Yer' Beans...
Route Building A.D.D!!![Wink :wink:](./images/smilies/icon_wink.gif)
Route Building A.D.D!!
![Wink :wink:](./images/smilies/icon_wink.gif)